Item Descriptions:

size:

2 sets for iPhoneX rear

Eonfine iPhone X 3d Rear Toughened Glass Fill is designed for iPhone X solely for ultra-thin design and does not impair the thinness of the original smartphone.

Do not damage the beautiful body design of iPhoneX, thoroughly protect your valuable smartphone's liquid crystal.

Oil-repellent coating processing is applied, so it is hard to get dirty, smooth touch and smooth touch are realized.

Even with fingerprints, cosmetic dirt, oil and dust, it can be wiped off easily, it will become clean immediately.

The light collecting effect of the glass has a brighter and clearer visual effect, and you can enjoy photos and videos with high image quality as it is on the screen.

set content:

Tempered glass * 2

Cleaning cloth * 1

Dust sticker * 1

please note:

※ Keep away from fire, direct sunlight Keep away from places where hands of infants can reach.

※ This product is subject to change, design, specification etc. without notice for improvement, improvement.

Features:

• Please enter model number Confirm this is compatible:
• [Compatible models] iPhone X compatible Rear protection tempered glass film (5.8 inch) 2 piece set
• 【Surface hardness 9H】 Using the glass of the highest grade strength, the surface hardness is 9H, it is about 3 times the strength of the PET protective film, and from your various scratches of everyday such as keys and coins in the bag, gravel and sand
• I thoroughly protect the important iPhone X's LCD.
• By adopting the scattering prevention film, even if the glass cracks by any chance the fragments will not scatter.
• [Excellent touch feeling] iPhone X exclusively designed for ultra-thin design that does not impair the thinness of the original smartphone.
• Oil-repellent coating processing is applied, so it is hard to get dirty, smooth touch and smooth touch are realized.
• 【High transmittance】 With high transparency rate, you can enjoy photos and movies with high picture quality as it is on the screen.
• It is easy to stick with a self-adsorbing silicon film applied on the adhesive surface and does not contain air bubbles.
• 【How to use】 1. Wipe the surface of the smartphone with the enclosed alcohol pad and clean cloth.
• 2. Peel off the release film on the adhesive side, and fit the screen, microphone, button part properly, then slowly and carefully adhere to the surface.
• 3. By gently pushing the center of the glass, it is difficult for air bubbles to come in and evenly bring it into full screen contact.
• 4. When air bubbles remain, push out bubbles lightly with your fingers and move it to the edge of the film and pull it out.

Product information:

Shipping Weight: 117 g

Package Dimensions: 0.51 x 8.00 x 16.00 cm