Item Descriptions:

What is ONETAKE HOBBY brand ...

It is a hobby series of "ONETAKE" pursuing goodness of purchase and quality.

"ONETAKE" wine take is the brand name which implies the meaning that we want you to obtain firm trust and satisfaction with a heartfelt heart.

Product features

For air guns and electric guns, the diffusion of lipo-batteries advanced.

But have you exchanged the battery and electric gun connection connectors?

Normal EP connector has rated current of 10A.

The rated output of LiPo battery is approximately 30 A.

I do not fully capitalize on the performance of Lipo Batteries.

We recommend exchanging to T type 2P connector with rated output of 50 A.

Heat shrinkable tube is attached for preventing solder cracks due to vibration of the motor.

Product size

【Product content】

T type 2P connector (Deans connector): 10 male and female each

With instruction manual

ONETAKE original warranty card

Heat shrinkable tube Φ 3 mm Red and black 50 cm each

Heat shrinkable tube Φ 5 mm Red and black 50 cm each

【Product size】

Thickness: 9.5 mm

Width: 16.5 mm

Weight: 5.8 g (1 set)

Rated output: 50 A

【Product Features】

It is in a package with a dedicated chuck.

Plugging / unplugging the connector is slightly stiff.

This is because the spring is used to increase the degree of adhesion between the connectors and to transmit the current without loss.

The cap part is also made slightly stiff.

【Original Warranty】

Products were inspected by professional staff in Japan.

Original product warranty comes with it.

[Heat shrinkable tube]

Heat shrinkable tube for cable making is attached.

Please also use it to prevent solder cracks caused by vibration of the motor.

Even when making with a cable of Φ 3 mm, tubes corresponding to both cables are included in red and black 50 cm each, so that you can use it even when it is made with a large capacity Φ 5 mm cable.

Features:

• T type 2P connector: 10 male and female each with instruction manual
• Heat shrinkable tube for prevention of solder cracking and vibration during vibration is attached: Φ 3 mm / Φ 5 mm each 50 cm
• Compared with the large connector, the permissible current is large and the battery power can be delivered to the motor without loss.
• Plugging / unplugging the connector is slightly stiff.
• This is because the spring is used to increase the degree of adhesion between the connectors and to transmit the current without loss.
• The cap part is also made slightly stiff.
• 【Product Size】 Thickness: 9.5 mm Width: 16.5 mm Weight: 5.8 g (1 set) Rated output: 50 A

Product information:

Shipping Weight: 81 g

Package Dimensions: 1.19 x 13.00 x 16.99 cm