Step 1 - Back Cover

Remove the battery and memory card from the device.

Step 2

Remove 4 screws from the right side of the camera.
There are two 3.4mm screws at the top.
There are two 2.2mm screws.

Step 3

Remove the single 3.4mm screw on the left side of the camera.

Step 4

Remove 5 screws from the base of the camera.
There are two 2.2mm screws next to the battery compartment.
There are three 4mm.

Step 5

Slowly slide the back cover away from the device.
The back casing is held in place by two ribbon cables. Do not pull the back cover too far from the camera.

Step 6

Detach both ribbon cables using a spudger.
Use the tip of the spudger to lift the black clip upward, unlocking the ribbon cable.

Step 7

Remove the back casing from the camera.

Step 8 - LCD

Use a spudger to release the 3 clips between the LCD case and housing.
Put the tip of the spudger in the gap between the clip and housing, then lift up gently to unclip.
Gently lift the LCD from the case, making sure none of the 3 clips reattach.

Description

No reasons to miss the excellent replacement LCD Screen Display

This is a high quality LCD Screen Display for Sanyo Xacti VPC-S120 X1250 X1220 Pentax H90. It is used to replace faulty screen, this will also can replace screens which have display problems, cracked LCD screens and so on. It is the best replacement for your damaged screen.

FEATURES

Made of high quality material, durable enough
Best replacement for your damaged, cracked or dirty screen
Easy installation, no soldering need
Give your digital camera a new look
It is the best choice for you
Suit for Sanyo Xacti VPC - S120, X1250

Specifications

Dimensions	3.54" x 1.85" / 9 x 4.7 cm (L x W )
Weight	0.53 oz / 15 g
Backlight	Yes
Compatible with	Sanyo Xacti VPC - S120 X1250 X1220 Pentax H90

Package Includes

1 x LCD Screen Display for Sanyo Xacti VPC-S120 X1250 X1220 Pentax H90

Extra Info

Compatibility: Sanyo Xacti VPC-S120 / X1250 / X1220, Pentax H90